914M - 2016 Compact Wheel Loader

Request a Quote

  • This field is for validation purposes and should be left unchanged.

914M – Compact Wheel Loader

914M Compact Wheel Loader

The 914M – 2016, Tier 4 Final, Stage IV, EU, NACD is a compact wheel loader from Caterpillar®, and it can help to add precision, versatility and performance to any application. This wheel loader is chock full of features that you’ll love, like the CAT Optimized Z-bar Loader Linkage, which gives you more control and allows you to handle loads confidently and safely. There’s no other compact wheel loader like it, and our CAT dealers can help you determine if it’s right for your needs. Learn more when you contact us today.

  • Specs

Specs

Overview

Long Name:
914M Compact Wheel Loader
Name:
914M
Brand:
Caterpillar
Status:
Current

Engine

Net Power:
97 HP / 72 kW
Engine Model:
Cat C4.4 ACERT�
Maximum Gross Power - ISO 14396:
100 HP / 74 kW
Maximum Gross Power - ISO 14396 (DIN):
101 HP / 74 kW
Maximum Gross Power - Maximum Engine Speed:
2350 r/min / 2350 r/min
Maximum Gross Power - SAE J1995:
102 HP / 76 kW
Rated Net Power - Rated Engine Speed:
2200 r/min / 2200 r/min
Rated Net Power - SAE J1349:
96 HP / 72 kW

Weights

Operating Weight:
19315 lb / 8761 kg

Service Refill Capacities

Cooling System:
5.7 gal (US) / 21.5 l
Fuel Tank:
40.7 gal (US) / 154 l
Engine Crankcase:
2.3 gal (US) / 8.8 l
Hydraulic System - Including Tank:
25.9 gal (US) / 98 l

Operating Specifications

Rated Bucket Capacity:
2.5 yd³ / 1.9 m³

Engine

Maximum Gross Power:
100 HP / 74 kW

Buckets

Bucket Capacities:
1.3-1.9 m3 (1.7-2.5 yd3)

Cab

ROPS:
ISO 3471:2008
FOPS:
ISO 3449:2005 Level II

Axles

Front:
Fixed; Locking differential (standard)
Rear:
Oscillating �11 degrees; Locking differential (Standard)

Cab

Note (1):
Cab and Rollover Protective Structures (ROPS) are standard in North America and Europe.
Note (2):
The declared dynamic operator sound pressure levels per ISO 6396:2008*, when properly installed and maintained, is 77 dB(A).
Note (3):
The labelled sound power level for the CE marked configurations when measured according to the test procedure and conditions specified in 2000/14/EC is 103 dB(A).
Note (4):
*The measurements were conducted with the cab doors and windows closed.

Engine

Bore:
4.13 in / 105 mm
Displacement:
268 in³ / 4.4 l
Emissions:
Engine meets U.S. EPA Tier 4 Final/EU Stage IV emission standards.
Maximum Gross Torque - ISO 14396:
332 ft·lbf / 450 N·m
Maximum Gross Torque - SAE J1995:
336 ft·lbf / 455 N·m
Note:
Net power advertised is the power available at the flywheel plus front drive implement pump when the engine is equipped with fan, air cleaner, muffler and alternator.
Rated Net Power - ISO 9249:
97 HP / 72 kW
Rated Net Power - ISO 9249 (DIN):
98 HP / 72 kW
Stroke:
5 in / 127 mm

Engine - Tier 4 Final/Stage IV

Maximum Net Torque - ISO 9249:
329 ft·lbf / 446 N·m
Maximum Net Torque - SAE J1349:
325 ft·lbf / 441 N·m

Loader Hydraulic System

Hydraulic Cycle Time - Dump, at Maximum Reach:
1.4 s / 1.4 s
Hydraulic Cycle Time - Float Down, Maximum Lift to Ground Level:
3.7 s / 3.7 s
Hydraulic Cycle Time - Rackback:
2.2 s / 2.2 s
Hydraulic Cycle Time - Raise, Ground Level to Maximum Lift:
5.2 s / 5.2 s
Hydraulic Cycle Time - Total Cycle Time:
12.5 s / 12.5 s
Maximum Flow - Implement Pump:
39 gal/min / 148 l/min
Maximum Flow - Implement Pump - 3rd Function, Maximum Flow, High:
32 gal/min / 120 l/min
Maximum Flow - Implement Pump - 3rd Function, Maximum Flow, Standard:
24 gal/min / 90 l/min
Maximum Flow - Implement Pump - 4th Function, Maximum Flow:
24 gal/min / 90 l/min
Maximum Working Pressure - Implement Pump:
4061 psi / 28000 kPa
Relief Pressure - Tilt Cylinder:
4931 psi / 34000 kPa
Relief Pressure - Tilt Cylinder - 3rd Function Maximum Working Pressure:
3046 psi / 21000 kPa
Relief Pressure - Tilt Cylinder - 4th Function Maximum Working Pressure:
3046 psi / 21000 kPa

Service Refill Capacities

Axles - Front Center Differential:
2 gal (US) / 7.5 l
Axles - Rear Center Differential:
2 gal (US) / 7.5 l
Diesel Exhaust Fluid (DEF) Tank:
5 gal (US) / 18.9 l
Hydraulic Tank:
14.5 gal (US) / 55 l
Note:
DEF used in Cat SCR systems must meet the requirements outlined in the International Organization for Standardization (ISO) standard 22241-1.
Transmission:
0.9 gal (US) / 3.4 l

Steering

Maximum Flow - Steering Pump:
22 gal/min / 82 l/min
Maximum Working Pressure - Steering Pump:
3263 psi / 22500 kPa
Number of Steering Wheel Turns - Full Left to Full Right or Full Right to Full Left:
3.75 turns / 3.75 turns
Steering Articulation Angle - Each Direction:
40 ° / 40 °
Steering Cycle Times - Full Left to Full Right - At 2,350 rpm: 90 rpm Steering Wheel Speed:
2.8 s / 2.8 s

Tires

Note (1):
Other tire choices are available. Contact your Cat dealer for details.
Note (2):
In certain applications, the loader's productive capabilities may exceed the tire's tonnes-km/h (ton-mph) capabilities.
Note (3):
Caterpillar recommends that you consult a tire supplier to evaluate all conditions before selecting a tire model.
Other Choices Include:
17.5-25 12PR L2; 17.5-R25 XHA * L3; 17.5-R25 * L2/L3 PC RM; 17.5-25 16PR L3, 3PC Rim; 17.5-25 GY L2/L3; 17.5-25 12PR L2, SNOW; Flexport�
Standard Size:
17.5-25 12PR

Transmission

Forward and Reverse - High Range:
25 mile/h / 40 km/h
Forward and Reverse - Low Range, Speed Range 1*:
6.3 mile/h / 10 km/h
Forward and Reverse - Low Range, Speed Range 2*:
12.5 mile/h / 20 km/h
Note:
*Creeper Control allows speed control from a stand still up to 10 km/h (6.3 mph). The Creeper Control will only work in Range 1.