D8T Track-Type Tractor – Tier 4 Final/Stage IV

Request a Quote

  • This field is for validation purposes and should be left unchanged.

D8T Track-Type Tractor – Tier 4 Final/Stage IV

The Cat D8T dozer has a long history of outstanding versatility, productivity and resale value. Because this bulldozer excels across a wide range of tasks, customers choose the D8T for everything from dozing, ripping, scraper work and land clearing to finish grading. And with features designed for even greater comfort, productivity and fuel efficiency, today's D8T does even more to help you meet your business objectives.
  • Standard Equipment
  • Optional Equipment
  • Specs

Standard Equipment

  • POWER TRAIN
    • C15 ACERT Diesel Engine: – Electronic Unit Injection (EUI) – Aftertreatment – Meets Tier 4 Final/Stage IV/Korea Tier 4 emission standards
    • 24V electric start
    • High performance single plane cooling system
    • Aftercooler, air-to-air (ATAAC)
    • Air filter, with electronic service indicator
    • Coolant, extended life
    • Fan, suction, hydraulically driven
    • Fuel priming pump, electric
    • Sound attenuated exhaust system
    • Parking brake, electronic
    • Precleaner, strata-tube dust ejector
    • Prescreener
    • Shift management: – Automatic directional and downshift – Controlled-throttle, load-compensated – Enhanced Auto Shift
    • Starting aid, automatic ether
    • Torque divider
    • Transmission, electronically-controlled powershift, 3F/3R speed
    • Four planet, double-reduction planetary final drives
    • Transmission control module, electronic
    • Turbocharger
    • Water separator
  • UNDERCARRIAGE
    • Rollers and idlers, lifetime lubricated
    • Sprocket rim segments, replaceable
    • Suspension-type undercarriage
    • 8-roller tubular track roller frame (Carrier roller ready)
    • Track adjusters, hydraulic
    • Track guide
    • 610 mm (24 in) PPR moderate service grouser with sealed and lubricated track (44 section)
    • Two-piece master links
  • HYDRAULICS
    • Hydraulics, independent steering and work tool pumps
    • Hydraulics, electronically controlled, load-sensing dozer lift and tilt
    • Electronically enabled quick drop valve
  • STARTERS, BATTERIES, AND ALTERNATORS
    • Alternator, 150 amp
    • Batteries, heavy duty
    • Starting receptacle, auxiliary
  • ELECTRICAL
    • Alarm, back-up
    • Converter, 24V to 12V
    • Diagnostic connector
    • Ground level service center with hour meter
    • Horn, forward warning
  • OPERATOR ENVIRONMENT
    • ROPS mounted air conditioner
    • Armrest, adjustable
    • Advisor operator interface: – Electronic monitoring system – Diagnostic service information – Operator preferences
    • Cab, ROPS/FOPS, sound suppressed
    • Deactivation switch, hydraulic controls
    • Access/egress lighting with shutdown timer
    • Decelerator pedal
    • Governor switch, electronic
    • Heater and ventilation
    • Mirror, rearview
    • Radio-ready
    • Provision for wire passage in/out of cab
    • Interior LED courtesy lights
    • Seat, cloth, air-suspension
    • Seat belt, retractable
    • Steering control, direction and speed control thumb switches with recall button
    • Wipers, intermittent
  • OTHER STANDARD EQUIPMENT
    • CD ROM Parts Book
    • Engine enclosures
    • Equalizer bar, pinned
    • Front pull device
    • Guards, bottom hinged
    • Grade control ready
    • HVAC box – corrosive resistant
    • Mounting, lift cylinders
    • Oil cooler, hydraulic
    • Product Link
    • S·O·S sampling ports
    • Steering, electronically controlled power differential
    • Vandalism protection for fluid compartments
    • Engine compartment service light
    • Six lights package

Optional Equipment

  • ELECTRICAL
    • Light, warning strobe
    • Mount, light, warning strobe
  • GUARDS
    • Guard, fuel tank
    • Guard, fast fuel
    • Guard, fan debris
    • Guard, grill debris
    • Sweeps group
    • Striker bars, front
    • Striker bars, front, suspended
    • Rear screen
  • OTHER ATTACHMENTS
    • Drains, ecology, power train
    • Fan speed, low, cold weather
    • Grab handles, push arm
    • Counterweight, additional
    • Black paint, blade
    • Window shades
    • PA140VS winch
    • W12 E PTO winch
  • LIFT CYLINDERS
    • Basic
    • GRADE with 3D
    • AutoCarry
  • BULLDOZERS
    • 8SU/U – basic, guarded or dual tilt guarded
    • 8SU LGP – basic
    • 8 LGP – single tilt guarded or dual tilt guarded
    • 8A
  • PUSH ARMS
    • Single tilt, standard or extreme
    • Dual tilt, standard or extreme
  • RIPPER SHANK TEETH
    • Multi-shank
    • Single shank
    • Single shank, deep ripping
  • BLADES
    • 8SU (10.3 m3/13.4 yd3): – With performance cutting edges and end bits – With performance cutting edges and end bits, plus rock guard and wear plate
    • 8SU – basic: – With rock guard and wear plate – With push plate – With landfill wear plate – LGP – LGP landfill
    • 8U – basic: – With rock guard and wear plate – With landfill wear plate
    • 8A

Specs

Overview

Long Name:
D8T Track-Type Tractor
Name:
D8T
Brand:
Caterpillar
Status:
Noncurrent

Engine

Engine Power - 1,600 rpm - ISO 14396:
394 HP / 294 kW
Engine Power - 1,600 rpm - ISO 14396 (DIN):
400 kW /  

Blades

8SU - Capacity - SAE J1265:
13.4 yd³ / 10.3 m³
8SU - Width - Over End Bits:
13.3 ft / 4042 mm
8U - Capacity - SAE J1265:
15.4 yd³ / 11.8 m³
8U - Width - Over End Bits:
14 ft / 4265 mm
8A - Capacity - SAE J1265:
6.8 yd³ / 5.2 m³
8A - Width - Over End Bits:
16.5 ft / 5043 mm
8SU LGP - Capacity - SAE J1265:
12.9 yd³ / 9.9 m³
8SU LGP - Width - Over End Bits:
14.9 ft / 4543 mm

Transmission

1.0 Forward:
2.2 mile/h / 3.5 km/h
2.0 Forward:
4.1 mile/h / 6.6 km/h
3.0 Forward:
7 mile/h / 11.3 km/h
2.0 Reverse:
4 mile/h / 6.4 km/h
3.0 Reverse:
7.3 mile/h / 11.8 km/h
1 Forward - Drawbar Pull:
148200 lb / 659.2 kN
2 Forward - Drawbar Pull:
82300 lb / 366.1 kN
3 Forward - Drawbar Pull:
46250 lb / 205.8 kN

Dimensions - Standard

Width - Tractor - Without Trunnions - Standard Shoes:
106 in / 2693 mm
Machine Height - ROPS/FOPS Cab:
140.4 in / 3566 mm
Length - Track on Ground:
126.2 in / 3206 mm
Overall Length - Basic Tractor:
183 in / 4647 mm
Ground Pressure (ISO 16754):
13 psi / 89.6 kPa
Ground Clearance:
24.1 in / 613 mm

Dimensions - Non-Suspended

Width - Tractor - Without Trunnions - Standard Shoes:
106 in / 2693 mm
Machine Height - ROPS/FOPS Cab:
140.7 in / 3575 mm
Length - Track on Ground:
128.3 in / 3258 mm
Overall Length - Basic Tractor:
183 in / 4647 mm
Ground Pressure (ISO 16754):
13 psi / 89.6 kPa
Ground Clearance:
23.8 in / 606 mm

Dimensions - LGP

Width - Tractor - Without Trunnions - Standard Shoes:
130 in / 3302 mm
Machine Height - ROPS/FOPS Cab:
140.4 in / 3566 mm
Length - Track on Ground:
126.2 in / 3206 mm
Overall Length - Basic Tractor:
183 in / 4647 mm
Ground Pressure (ISO 16754):
7.7 psi / 53.3 kPa
Ground Clearance:
2401 in / 613 mm

Dimensions

Note (1):
Add the following measurements for attachments: Ripper (single shank) 1519 mm/59.8 in; Ripper (multi-shank) 1613 mm/63.5 in; Drawbar 406 mm/16.0 in; SU Blade 1844 mm/72.6 in; U Blade 2241 mm/88.2 in; A Blade (not angled) 2027 mm/79.8 in; A Blade (angled 25 degrees) 3068 mm/120.8 in.
Note (2):
When Cat Grade Control 3D antennas are installed, overall machine height increases by approximately 82 mm/3.2 in.

Engine

Engine Model:
Cat C15 ACERT™
Flywheel Power:
354 HP / 264 kW
Emissions:
U.S. EPA Tier 4 Final/EU Stage IV/Korea Tier 4
Displacement:
928 in³ / 15.2 l
Bore:
5.4 in / 137 mm
Stroke:
6.75 in / 172 mm
Engine Power - Maximum - ISO 14396:
359 HP / 268 kW
Engine Power - Maximum - ISO 14396 (DIN):
364 HP / 268 kW
Engine Power - Maximum - SAE J1995:
363 HP / 271 kW
Net Power - Rated - ISO 9249/SAE J1349:
312 HP / 233 kW
Net Power - Rated - ISO 9249/SAE J1349 (DIN):
317 HP / 233 kW

Weights

Operating Weight:
86900 lb / 39420 kg
Operating Weight - Standard:
87600 lb / 39750 kg
Operating Weight - LGP:
82496 lb / 37420 kg
Shipping Weight - LGP:
68700 lb / 31160 kg
Shipping Weight - Standard SU Blade:
66300 lb / 30070 kg

Operating Weights

Standard:
87600 lb / 39750 kg
LGP:
83200 lb / 37750 kg

Transmission

1 Forward:
2.1 mile/h / 3.4 km/h
2 Forward:
3.8 mile/h / 6.1 km/h
3 Forward:
6.6 mile/h / 10.6 km/h
1 Reverse:
2.8 mile/h / 4.5 km/h
2 Reverse:
5 mile/h / 8 km/h
3 Reverse:
8.8 mile/h / 14.2 km/h
Drawbar Pull - 1 Forward:
148 lb / 661.1 kN
Drawbar Pull - 2 Forward:
81 lb / 363.1 kN
Drawbar Pull - 3 Forward:
44 lb / 197.5 kN

Hydraulic Controls

Pump Type:
Piston-type, Variable Displacement
Pump Output - Steering:
75 gal/min / 284 l/min
Pump Output - Implement:
64 gal/min / 244 l/min
Tilt Cylinder Flow - Rod End Flow:
35 gal/min / 132 l/min
Tilt Cylinder Flow - Head End Flow:
45 gal/min / 170 l/min
Bulldozer Relief Valve Setting:
3480 psi / 24000 kPa
Tilt Cylinder Relief Valve Setting:
3480 psi / 24000 kPa
Ripper - Lift - Relief Valve Setting:
3480 psi / 24000 kPa
Ripper - Pitch - Relief Valve Setting:
3480 psi / 24000 kPa
Steering:
5700 psi / 39200 kPa

Undercarriage - Standard

Ground Clearance:
24.1 in / 613 mm
Ground Contact Area:
6060 in² / 3.91 m²
Ground Pressure (ISO 16754):
13 psi / 89.6 kPa
Grouser Height:
3.1 in / 78 mm
Length - Track on Ground:
126 in / 3206 mm
Pitch:
8.5 in / 216 mm
Shoe Type:
Moderate Service
Shoes/Side:
44
Track Gauge:
82 in / 2083 mm
Track Rollers - Each Side:
8
Width - Shoe:
24 in / 610 mm

Undercarriage - LGP

Ground Clearance:
24.1 in / 613 mm
Ground Contact Area:
9593 in² / 6.19 m²
Ground Pressure (ISO 16754):
7.7 psi / 53.3 kPa
Grouser Height:
3.1 in / 78 mm
Length - Track on Ground:
126 in / 3206 mm
Pitch:
8.5 in / 216 mm
Shoe Type:
Moderate Service
Shoes/Side:
44
Track Gauge:
92 in / 2337 mm
Track Rollers - Each Side:
8
Width - Shoe:
38 in / 965 mm

Service Refill Capacities

Fuel Tank:
165 gal (US) / 627 l
DEF Tank:
6.3 gal (US) / 24 l
Cooling System:
22.7 gal (US) / 86 l
Engine Crankcase*:
10 gal (US) / 38 l
Power Train:
41 gal (US) / 155 l
Roller Frames - Each:
17.2 gal (US) / 65 l
Final Drive - Each:
3.3 gal (US) / 12.5 l
Pivot Shaft Compartment:
10.6 gal (US) / 40 l
Hydraulic Tank:
19.8 gal (US) / 75 l
Note:
*With oil filter

Blades - 8A

Capacity - SAE J1265:
6.8 yd³ / 5.2 m³
Width - Over End Bits:
16.6 ft / 5045 mm

Blades - 8SU - Version 1

Capacity - SAE J1265:
11.3 yd³ / 8.6 m³
Digging Depth:
22.6 ft / 574 mm
Ground Clearance:
50.7 in / 1288 mm
Height:
5.5 in / 1690 mm
Maximum Tilt:
35.1 lb / 892 kg
Note (1):
*Includes blade tilt cylinder.
Note (2):
**Operating Weight: Includes hydraulic controls, blade tilt cylinder, coolant, lubricants, 100% fuel, ROPS, FOPS cab, blade, single-shank ripper, 610 mm (24 in) MS shoes, and operator.
Total Operating Weight** - With Blade and Single-Shank Ripper:
86900 ft / 39420 mm
Weight* - Without Hydraulic Controls:
10100 lb / 4260 kg
Width - Over End Bits:
12.9 in / 3931 mm

Blades - 8SU - Version 2

Capacity - SAE J1265:
13.4 yd³ / 10.3 m³
Digging Depth:
22.8 in / 578 mm
Ground Clearance:
48.7 in / 1236 mm
Height:
5.7 ft / 1750 mm
Maximum Tilt:
36 in / 915 mm
Note (1):
*Includes blade tilt cylinder.
Note (2):
**Operating Weight: Includes hydraulic controls, blade tilt cylinder, coolant, lubricants, 100% fuel, ROPS, FOPS cab, blade, single-shank ripper, 610 mm (24 in) MS shoes, and operator.
Total Operating Weight** - With Blade and Single-Shank Ripper:
86900 lb / 39420 kg
Weight* - Without Hydraulic Controls:
10557 lb / 4789 kg
Width - Over End Bits:
13.3 ft / 4041 mm

Blades - 8U

Capacity - SAE J1265:
15.4 yd³ / 11.8 m³
Digging Depth:
22.3 in / 567 mm
Ground Clearance:
48.8 in / 1239 mm
Height:
5.7 ft / 1741 mm
Maximum Tilt:
39.2 in / 996 mm
Note (1):
*Includes blade tilt cylinder.
Note (2):
**Operating Weight: Includes hydraulic controls, blade tilt cylinder, coolant, lubricants, 100% fuel, ROPS, FOPS cab, blade, single-shank ripper, 610 mm (24 in) MS shoes, and operator.
Total Operating Weight** - With Blade and Single-Shank Ripper:
88300 lb / 40055 kg
Weight* - Without Hydraulic Controls:
11500 lb / 4895 kg
Width - Over End Bits:
13.9 ft / 4251 mm

Winches

Winch Model:
PA 140OVS
Weight*:
3947 lb / 1790 kg
Oil Capacity:
4 gal (US) / 15 l
Increased Tractor Length:
22.2 in / 563 mm
Winch Case - Width:
45.6 in / 1160 mm
Drum Width:
12.6 in / 320 mm
Flange Diameter:
18 in / 457 mm
Cable Ferrule Size - Length:
2.76 in / 70 mm
Cable Ferrule Size - Outside Diameter:
2.36 in / 60 mm
Drum Capacity - Optional Cable:
193 ft / 59 m
Drum Capacity - Recommended Cable Size:
276 ft / 84 m
Note (1):
*Weight: Includes pump and operator controls.
Optimal Cable Size:
1.25 in / 32 mm
Recommended Cable Size:
1.13 in / 29 mm
Winch Length:
56.3 in / 1430 mm

Ripper - Multi-Shank, Adjustable Parallelogram

Maximum Clearance Raised - Under Tip, Pinned in Bottom Hole:
23.35 in / 593 mm
Maximum Penetration - Standard Tip:
30.7 in / 780 mm
Maximum Penetration Force - Shank Vertical:
27920 lb / 124.2 kN
Number of Pockets:
3
Overall Beam Width:
97 in / 2464 mm
Pry-Out Force - Multi-Shank Ripper with One Tooth:
51230 lb / 222.9 kN
Weight - Each Additional Shank:
732 lb / 332 kg
Weight - With One Shank:
8681 lb / 3946 kg

Ripper - Single-Shank, Adjustable Parallelogram

Maximum Clearance Raised - Under Tip, Pinned in Bottom Hole:
25 in / 636 mm
Maximum Penetration - Standard Tip:
44.4 lb / 1130 kN
Maximum Penetration Force - Shank Vertical:
28620 lb / 127.3 kN
Note:
*Total Operating Weight: Includes hydraulic controls, blade tilt cylinder, coolant, lubricants, 100% fuel. ROPS, FOPS cab, blade, single-shank ripper, 610 mm (24 in) MS shoes, and operator.
Number of Pockets:
1
Pry-Out Force:
50070 in / 222.7 mm
Total Operating Weight* - With SU-Blade and Ripper:
86900 lb / 39420 kg
Weight* - Without Hydraulic Controls:
8705 lb / 3957 kN

Standards

FOPS:
Falling Object Protective Structure (FOPS) meets the following criteria: ISO 3449:2005 Level II.
ROPS:
Rollover Protective Structure (ROPS) meets the following criteria: ISO 3471:2008.
Brakes:
Crawler Machine Brake Requirements meets the following criteria: ISO 10265:2008.

Engine

Net Power - 1,900 rpm - ISO 9249/SAE J1349:
354 HP / 264 kW
Net Power - 1,900 rpm - ISO 9249/SAE J1349 (DIN):
317 HP / 359 kW
Note (3):
All nonroad Tier 4 Final, Stage IV and Korea Tier 4 Final diesel engines are required to use only Ultra Low Sulfur Diesel (ULSD) with 15 ppm (mg/kg) of sulfur or less, or up to B20 biodiesel blended with ULSD. B20 should meet ASTM D7467 specification (biodiesel blend stock should meet Cat biodiesel spec, ASTM D6751 or EN 14214). Cat DEO-ULS� or oils that meet the Cat ECF-3, API CJ-4, and ACEA E9 specification are required. Consult your OMM for further machine specific fuel recommendations.
Note (4):
Diesel Exhaust Fluid (DEF) used in Cat Selective Catalytic Reduction (SCR) systems must meet the requirements outlined in the International Organization for Standardization (ISO) standard 22241.

Air Conditioning System

Air Conditioning:
The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 2.5 kg of refrigerant which has a CO2 equivalent of 3.575 metric tonnes.

Weights - Waste Handler

Operating Weight - Standard:
87400 lb / 39650 kg
Operating Weight - LGP:
92300 lb / 41850 kg

Blades - 8 SU LGP Landfill

Capacity - SAE J1265:
28.9 yd³ / 22.1 m³
Digging Depth:
20.2 in / 513 mm
Ground Clearance:
51.5 in / 1308 mm
Height:
7.9 ft / 2421 mm
Maximum Tilt:
35.7 in / 908 mm
Note (1):
*Includes blade tilt cylinder.
Note (2):
**Operating Weight: Includes hydraulic controls, blade tilt cylinder, coolant, lubricants, 100% fuel, ROPS, FOPS cab, blade, single-shank ripper, 610 mm (24 in) MS shoes, and operator.
Total Operating Weight** - With Blade and Single-Shank Ripper:
83635 lb / 37467 kg
Weight* - Without Hydraulic Controls:
7734 lb / 3508 kg
Width - Over End Bits:
14.9 ft / 4531 mm

Blades - 8 SU Landfill

Capacity - SAE J1265:
25.6 yd³ / 19.6 m³
Digging Depth:
22.6 in / 574 mm
Ground Clearance:
50.7 in / 1288 mm
Height:
8.1 ft / 2467 mm
Maximum Tilt:
35.1 in / 892 mm
Note (1):
*Includes blade tilt cylinder.
Note (2):
**Operating Weight: Includes hydraulic controls, blade tilt cylinder, coolant, lubricants, 100% fuel, ROPS, FOPS cab, blade, single-shank ripper, 610 mm (24 in) MS shoes, and operator.
Total Operating Weight** - With Blade and Single-Shank Ripper:
88800 lb / 40282 kg
Weight* - Without Hydraulic Controls:
7867 lb / 3569 kg
Width - Over End Bits:
12.9 ft / 3931 mm

Blades - 8A

Digging Depth:
24.6 in / 625 mm
Ground Clearance:
52.1 in / 1323 mm
Height:
3.9 ft / 1177 mm
Maximum Tilt:
28.9 in / 733 mm
Note (1):
*Includes blade tilt cylinder.
Note (2):
**Operating Weight: Includes hydraulic controls, blade tilt cylinder, coolant, lubricants, 100% fuel, ROPS, FOPS cab, blade, single-shank ripper, 610 mm (24 in) MS shoes, and operator.
Total Operating Weight** - With Blade and Single-Shank Ripper:
88700 lb / 40281 kg
Weight* - Without Hydraulic Controls:
11900 lb / 5121 kg

Blades - 8SU LGP

Capacity - SAE J1265:
12.9 yd³ / 9.9 m³
Digging Depth:
20.2 in / 513 mm
Ground Clearance:
51.5 in / 1308 mm
Height:
5.3 ft / 1622 mm
Maximum Tilt:
35.7 in / 908 mm
Note (1):
*Includes blade tilt cylinder.
Note (2):
**Operating Weight: Includes hydraulic controls, blade tilt cylinder, coolant, lubricants, 100% fuel, ROPS, FOPS cab, blade, single-shank ripper, 610 mm (24 in) MS shoes, and operator.
Total Operating Weight** - With Blade and Single-Shank Ripper:
82496 lb / 36950 kg
Weight* - Without Hydraulic Controls:
11150 lb / 4703 kg
Width - Over End Bits:
14.9 ft / 4531 mm

Blades - 8U Landfill

Capacity - SAE J1265:
27.7 yd³ / 21.2 m³
Digging Depth:
22.3 in / 567 mm
Ground Clearance:
48.8 in / 1239 mm
Height:
8.3 ft / 2530 mm
Maximum Tilt:
39.2 in / 996 mm
Note (1):
*Includes blade tilt cylinder.
Note (2):
**Operating Weight: Includes hydraulic controls, blade tilt cylinder, coolant, lubricants, 100% fuel, ROPS, FOPS cab, blade, single-shank ripper, 610 mm (24 in) MS shoes, and operator.
Total Operating Weight** - With Blade and Single-Shank Ripper:
90383 lb / 41000 kg
Weight* - Without Hydraulic Controls:
9450 lb / 4287 kg
Width - Over End Bits:
13.9 ft / 4251 mm

Engine

Engine Power - 1,700 rpm - ISO 14396:
359 HP / 268 kW
Engine Power - 1,700 rpm - ISO 14396 (DIN):
364 HP / 268 kW
Engine Power - 1,700 rpm - SAE J1995:
363 HP / 271 kW
Note (1):
Net power advertised is the power available at the flywheel when the engine is equipped with fan, air cleaner, muffler, and alternator.
Note (2):
No derating required up to 3566 m (11,700 ft) altitude, beyond 3566 m (11,700 ft) automatic derating occurs.

Hydraulic Controls

Note (1):
Steering Pump output measured at 2,364 rpm (pump speed) and 30 000 kPa (4,351 psi).
Note (2):
Implement Pump output measured at 1,900 rpm and 6895 kPa (1,000 psi).
Note (3):
Electro-hydraulic pilot valve assists operations of ripper and dozer controls. A standard hydraulic system includes four valves.
Note (4):
Complete system consists of pump, tank, filter, oil cooler, valves, lines, and control levers.

Ripper - Multi-Shank, Adjustable Parallelogram

Note:
*Total Operating Weight: Includes hydraulic controls, blade tilt cylinder, coolant, lubricants, 100% fuel. ROPS, FOPS cab, blade, single-shank ripper, 610 mm (24 in) MS shoes, and operator.
Total Operating Weight* - With SU-Blade and Ripper:
86876 lb / 39409 kg

Standards

Note (1):
The declared dynamic operator sound pressure level is 76 dB(A) when “ISO 6396:2008” is used to measure the value for an enclosed cab. The measurement was conducted at 70% of the maximum engine cooling fan speed. The sound level may vary at different engine cooling fan speeds. The measurement was conducted with the cab doors and the cab windows closed. The cab was properly installed and maintained.
Note (2):
Hearing protection may be needed when the machine is operated with an open operator station for extended periods or in a noisy environment. Hearing protection may be needed when the machine is operated with a cab that is not properly maintained or when the doors and windows are open for extended periods.
Note (3):
Sound Level Information for Machines in European Union Countries and in Countries that Adopt the “European Union Directives” – The information below applies to only the machine configurations that have the “CE” mark on the Product Identification Plate.
Note (4):
The declared dynamic operator sound pressure level is 75 dB(A) when “ISO 6396:2008” is used to measure the value for an enclosed cab. The measurement was conducted at 70% of the maximum engine cooling fan speed. The sound level may vary at different engine cooling fan speeds. The measurement was conducted with the cab doors and the cab windows closed. The cab was properly installed and maintained.
Note (5):
The declared exterior sound power level is 113 dB(A) when the value is measured according to the dynamic test procedures and the conditions that are specified in “ISO 6395:2008.” The measurement was conducted at 70% of the maximum engine cooling fan speed. The sound level may vary at different engine cooling fan speeds.

Weights

Note (1):
Operating Weight – Standard: Includes hydraulic controls, blade, tilt cylinder, coolant, lubricants, 100% fuel, ROPS, FOPS cab, SU-Blade, Single-Shank Ripper, 610 mm (24 in) MS shoes, and operator.
Note (2):
Operating Weight – LGP: Includes hydraulic controls, blade, tilt cylinder, drawbar, coolant, lubricants, 100% fuel, ROPS, FOPS cab, SU-Blade, 965 mm (38 in) MS shoes, and operator.
Note (3):
Shipping Weight – Standard: Includes coolant, lubricants, 20% fuel, ROPS, FOPS cab, and 610 mm (24 in) MS shoes.
Note (4):
Shipping Weight – LGP: Includes coolant, lubricants, 20% fuel, ROPS, FOPS cab, and 965 mm (38 in) MS shoes.

Weights - Waste Handler

Note (1):
Operating Weight – Standard: Includes hydraulic controls, blade, tilt cylinder, coolant, lubricants, 100% fuel, ROPS, FOPS cab, Waste SU-Blade, striker box, 610 mm (24 in) MS shoes, and operator.
Note (2):
Operating Weight – LGP: Includes hydraulic controls, blade, tilt cylinder, drawbar, coolant, lubricants, 100% fuel, ROPS, FOPS cab, Waste SU-Blade, 965 mm (38 in) MS shoes, striker box, and operator.
Note (3):
Shipping Weight – Standard: Includes coolant, lubricants, 20% fuel, ROPS, FOPS cab, striker box, and 610 mm (24 in) MS shoes.
Note (4):
Shipping Weight – LGP: Includes coolant, lubricants, 20% fuel, ROPS, FOPS cab, striker box, and 965 mm (38 in) MS shoes.
Shipping Weight - LGP:
77900 lb / 35367 kg
Shipping Weight - Standard:
73400 lb / 33324 kg

Winches

Note (2):
Variable speed, hydraulically driven, dual braking system, three roller fairlead.